hi the problem that i have is not in setting G54 first time. the problem is in changing volume. for intance G54 set to X1 Y1 Z1 , how to reset G54 to X3 Y3 Z3? i can not reset volume G54. thanks Aram
> On Tue, Nov 18, 2008 at 07:53:38PM -0600, Stuart Stevenson wrote: >> Gentlemen, >> I worked with Aram on this. When G54 is active the G10 assignment >> will not write to the G54 offset. Maybe there should be a notice come >> up on the screen telling someone the offset values are not written >> when the attempted write is to an active offset. >> thanks >> Stuart > > Thanks Stuart. Can you give more details about what you are seeing > that is not what you expect? Here is the procedure I used to test > it, and it does what I expect: > > start emc (G54 is active) > home machine > note DRO reads 0,0,0 > mdi G10 L2 P1 X1 to move origin to X=1 in unoffset machine coordinates > note DRO reads -1,0,0 > > mdi G0 X0 > machine moves 1" to the right > note DRO now reads 0,0,0 > > > ------------------------------------------------------------------------- > This SF.Net email is sponsored by the Moblin Your Move Developer's > challenge > Build the coolest Linux based applications with Moblin SDK & win great > prizes > Grand prize is a trip for two to an Open Source event anywhere in the > world > http://moblin-contest.org/redirect.php?banner_id=100&url=/ > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------- This SF.Net email is sponsored by the Moblin Your Move Developer's challenge Build the coolest Linux based applications with Moblin SDK & win great prizes Grand prize is a trip for two to an Open Source event anywhere in the world http://moblin-contest.org/redirect.php?banner_id=100&url=/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
