On 10 Dec 2008 at 11:19, Stephen Wille Padnos wrote: > John Thornton wrote: > > > >A switch will make the in-not True when closed and False when open > >and the in will be False when closed and True when open. > > > > > That's not necessarily true. Whether the switch is NC or NO makes > no > difference. It's whether the switch is normally pulled high,
I'm guessing your speaking of the input pin on the parallel port not the switch as the switch only opens and closes... > normally > pulled low, or normally left floating (which is equivalent to pulled > high in most cases). "A +5V level on the parallel port pin will make the -in pin 1 and the -in-not pin 0, a 0V level on the parallel port pin will make -in 0 and -in-not 1." The above seems to be the most accurate description but would a newbee understand? The driver knows that some of the > pins > are inverted in hardware, and inverts those before setting the state > of > the HAL pins. I didn't even think of the wiring issue. The pin could pulled low or high when the switch closes??? and only floating when the switch is open??? In most cases when you close your switch would you put +5vdc on the parallel port pin or 0vdc? > > (Not being pedantic here - I just don't want people to see this and > assume that something is wrong with EMC2 because their input isn't > working the way this describes) > > - Steve > Steve makes John look up the definition of pedantic :) John ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
