Sebastian, The line it is apparently choking on is: Loadrt hm2_5i20 config="firmware=hm2/5i20/SVST8_4.BIT num_stepgens=2 num_pwmgens=1 num_encoders=0 enable raw".
I also removed the enable raw and got the same error. The preceding line, loadrt hostmot2 seems to work. Here is the suspicious part. [ 75.324107] hm2: loading Mesa HostMot2 driver version 0.15 [ 75.334101] hm2_5i20: loading Mesa AnyIO HostMot2 driver version 0.4 [ 75.334114] hm2_5i20: *** *** *** *** *** *** *** *** *** *** ** *** *** *** *** *** *** *** *** *** *** *** [ 75.334124] hm2_5i20: *** NOTE: This driver is obsolete, you should use hm2_pci instead, it works better *** [ 75.334133] hm2_5i20: *** *** *** *** *** *** *** *** *** *** ** *** *** *** *** *** *** *** *** *** *** *** [ 75.482406] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 75.482419] printing eip: [ 75.482423] f9013386 [ 75.482426] *pde = 00000000 [ 75.482434] Oops: 0000 [#1] The full dmesg output can be found here: http://pastebin.com/m139d147c Regards, Eric There should not have been any changes between 2.2.7 and 2.2.8 that required config changes or that would cause a load failure. Please pastebin the dmesg output. ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
