On Tue, 2008-12-16 at 20:33 +0100, Ádám Novák wrote: > Gentlemen, > > We have been using CATIA CAM for APT generation for our CNC milling machines > (mainly Fanuc). This works great, however EMC does not seem to understand > this type of code. As far as I know RS274NGC is the exact interpreter name > EMC2 uses, right? If so, does anyone know of such software that would do the > conversion from APT to G code? > > Regards, > Adam
Hi Adam What kind of error messages do you get when you try to run one of these. Fanuc made use of an "O" word as a filename. It is very near the head of a typical fanuc file. I've been able to run some of these files after I removed that reference. HTH Rayh ------------------------------------------------------------------------------ SF.Net email is Sponsored by MIX09, March 18-20, 2009 in Las Vegas, Nevada. The future of the web can't happen without you. Join us at MIX09 to help pave the way to the Next Web now. Learn more and register at http://ad.doubleclick.net/clk;208669438;13503038;i?http://2009.visitmix.com/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
