> Thomas Kaiser wrote: > > >> Hello All >> >> I am looking for a MB witch is good for running EMC2. >> I have been using off-lease Dell Optiplex boxes for some time with excellent results. Most of these are working well with the on-mobo video, but one of them does have poor latency. I use that as a bench test system, so the latency is not a problem there. You can always plug in a PCI video card if the latency is not good. I have a couple GX110's here in different sized boxes. I have also used GX150s with good results. If you need fast software generated steps, then maybe a faster CPU is in order. These 600+ MHz units have been fine for use with servo controllers. A main feature is the mobo parallel ports are VERY stable and reliable.
I don't know whether you have a particular reason for worrying over fans, such as shop dust. Solid state drives that plug into the ATA connector are available cheap on eBay. How well they work is not really clear, yet. Jon ------------------------------------------------------------------------------ Check out the new SourceForge.net Marketplace. It is the best place to buy or sell services for just about anything Open Source. http://p.sf.net/sfu/Xq1LFB _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
