I am done installing and testing a touch-trigger probe. It works but I am having trouble re-using the results of the probing. I used the following example:
http://www.isd.mel.nist.gov/personnel/kramer/pubs/RS274NGC_3.web/RS274NGC_33a.html#1013622 Where are the the values such as #5061, #5062, #5063, #1011...recorded? Are they written in a file? This is my code: (Probing sequence for left lens) G38.2 X0.0 F240.0 (Probe -X side of left lens) #1011=#5061 (Save results) G0 X[#1011-2.0] (Backs off 2 mm) G38.2 X0.0 F120.0 (Probe -X side of left lens at slower feed rate) #1011=#5061 (Save results) #1021=[#1011+1.0] (Very good value of-X side of left lens) G0 X[#1021-3.6] G38.2 Z20.0 F120.0 (Probe bottom of -X side of left lens) #1012=#5062 (Save results) #1022=[#1012-1.0] (Very good value of bottom of -X side of left lens) G0 Z5.0 X[#1021-10.0] Z20.0 X[#1021-3.6] G01 Z13.0 F240.0 G38.2 Z5.0 F120.0 (Probe top of -X side of left lens) #1013=#5063 (Save results) #1023=#1013 (Very good value of top of -X side of left lens) G0 Z20.0 Y0.0 M03 S1000 (Temple Holes on Left Eye) X[#1021+2.0] X[#1021+4.0] I would like to verify what my probing sequence is producing. Thanks for your help. Patrice Portland, OR ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
