Peter,
Reading this list daily is an education all in itself. I've
been on it for a couple of years now, and the stuff that comes out of
the woodwork when a question is asked is amazing. We've got
developers here, manufacturers, home brewing hobby guys like me, and
many others. And lots of these guys have vast stores of knowledge
and tips, and "here's how I did that" kinda stuff. If you get stuck
on something, all you gotta do is ask.
Mark
At 02:40 PM 1/26/2009, you wrote:
>Thanks, Jeff, I hope some time I will know what I'm doing...
>Peter
>
>
>At 14:20 26.01.2009, you wrote:
> >starting from a stepconf file, you need to at least
> >* delete all the parport.0.pin-##-out-reset lines in your hal file
> >* delete the 'addf parport.0.reset' line in your hal file
> >* delete the 'setp parport.0.reset-time' line in your hal file
> >* set the steplen and stepspace parameters to datasheet numbers in ns
> >to disable the "doublestep" mode and get the long step pulse lengths
> >that are required for your driver board.
> >
> >Jeff
------------------------------------------------------------------------------
This SF.net email is sponsored by:
SourcForge Community
SourceForge wants to tell your story.
http://p.sf.net/sfu/sf-spreadtheword
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
