On Thu, Jan 29, 2009 at 04:09:29PM -0500, Marty Swartz wrote: > > My problem is that the JOG buttons on the MINI screen won't move the > steppers. I receive the message "command (EMC_AXIS_JOG) cannot be > executed until the machine is out of e-stop and turned on".
It sounds like the problem can more accurately be described as "mini doesn't come out of estop and turn machine on". > One more interesting factoid: Jog -does- work perfectly if I run the > AXIS interface, with NO other changes to wiring or INI files. (Estop > works fine in AXIS also.) So I'm hoping that there is a simple > configuration issue involved here. I understand that mini is not meant for use on machines with estop. It tries, upon startup, to turn the machine on automatically. I'm not sure how it does that - but it sounds like it is not working in your case. I think you will have better luck using AXIS or TkEMC guis which handle estop stuff. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
