Peter, >> I would check the power supply wiring
Note the 7I43 power connector is _not_ a floppy connector It is pinned out: 1 5V 2 GND 3 GND 4 5V << Yea, I realized that right after posting the question. I just saw the connector and thought how convenient that was to use the same connector as used by the CPU power supply. >> You probably have about 300 mA free with the HostMot2 configurations as it does not have too many things running in the FPGA when not accessed << At 300 mA, I should be fine. I only had the step, dir and enables connected for 3 stepper drives and it was already pulling about 100 mA, so I was a bit concerned if I only had 150 mA total to work with. Regards, Eric ------------------------------------------------------------------------------ Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
