How about the 3D model of CHIPS (our version of TUX) that was created by Rab as an STL file? I have a copy of the STL somewhere.
Steve Stallings > -----Original Message----- > From: Jon Elson [mailto:[email protected]] > Sent: Wednesday, March 11, 2009 12:08 PM > To: Enhanced Machine Controller (EMC) > Subject: [Emc-users] need sample contouring program > > Hello, all, > > I will be demo-ing EMC2 at the NAMES show in April. I wanted > to have some contouring program to show the fast EMC2 block > processing rate. > Does anyone have anything interesting that I could maybe cut > out of wax that has a lot of short vectors? The machine will > be a 150 Lb minimill, so it has a 4" limit in the Y axis. > > I could probably code up something that writes G-code to > carve a hemisphere or something like that, but if somebody > has a more interesting surface that might be good. I need to > re-scale the penguin and try that, too. > > Jon > > -------------------------------------------------------------- > ---------------- > Apps built with the Adobe(R) Flex(R) framework and Flex > Builder(TM) are powering Web 2.0 with engaging, > cross-platform capabilities. Quickly and easily build your > RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. > http://p.sf.net/sfu/www-adobe-com > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
