NAMES booths are 10' by 10' normally. Booth B15 shows on the floor plan as having a sliver of open space on one side, probably a mandated access to some safety related equipment on the facility wall. Otherwise you have only 10' of frontage for access. This is why I was hoping we could juggle and get 3 adjacent booths for PMDX, PICO, and EMC and thus share open space and allow people to walk through the booth while still having displays on the front.
The two supplied tables per booth are 2.5' by 8' and can be arranged as you wish, including as an L that slightly exceeds the 10' side dimension. Putting a table on each side results in an alley 5' wide down the middle, and this gets crowded easily. An open L with one table along the back wall would likely be best, unless the "sliver" is wide enough for people to walk back and forth between booths. Steve Stallings > -----Original Message----- > From: Dale Grover [mailto:dgro...@redcedar.com] > Sent: Tuesday, March 17, 2009 7:06 AM > To: Enhanced Machine Controller (EMC) > Subject: Re: [Emc-users] NAMES Backdrop Photos > > At 8:41 PM -0700 3/16/09, Dave Engvall wrote: > ><snip> > > Is anyone thinking about support for the backdrop pictures. IIRC > > the "old" Names venue was pretty much an open room. Unless > you get a > >booth with a wall you are going to need racks, dividers, etc to hang > >those beautiful pictures on. > > > >Dave > > While we're against a wall, I think we're required to have > everything freestanding. (I'll try to check.) Besides, I > think folks will want to look at the photos up close and read > the captions, so we can't have them too far away. We have > the space--perhaps the booth is an open U shape? > > --Dale > > EMC at NAMES 2009 wiki page: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?EMC2AtNAMES > > -------------------------------------------------------------- > ---------------- > Apps built with the Adobe(R) Flex(R) framework and Flex > Builder(TM) are powering Web 2.0 with engaging, > cross-platform capabilities. Quickly and easily build your > RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. > http://p.sf.net/sfu/www-adobe-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
