Hi Kirk, I copied and pasted a configuration setup from www.rym.com and all that came through was the logo. If you go to RYM's website, select support, select the CNC control type, there will be setup instructions and parameter instructions. A copy of RYM's software can be downloaded and used for thirty days. This may help to troubleshoot the communication issue.
Have a good day, Jim Fleig ----- Original Message ----- From: "Drew Rogge" <d...@dasrogges.com> To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net> Sent: Wednesday, March 18, 2009 1:41 PM Subject: Re: [Emc-users] OT: Tape to ASCII > Could it be that you need to mask the parity bit off of the tape input? > Is there any way you can tell what characters aren't be properly > presented? > > Kirk Wallace wrote: >> Please let me know if this is too far off topic. >> >> I have a friend with a couple of 80's vintage Mori Seiki's and a >> Matsuura, all with Yasnac controls. He wants to move g-code files >> through the serial ports with a laptop. I made a cable, set the serial >> port parameters and was able to get characters to a terminal emulator on >> the laptop. The problem is that some of the characters are not presented >> on the screen properly. My guess is that what is coming across is a tape >> code and the terminal needs ASCII. Is my guess correct? Will I need to >> buy BTR software or is there another way to save and load g-code through >> the controller serial ports? >> >> Kirk >> http://www.wallacecompany.com/machine_shop/ > > ------------------------------------------------------------------------------ > Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are > powering Web 2.0 with engaging, cross-platform capabilities. Quickly and > easily build your RIAs with Flex Builder, the Eclipse(TM)based development > software that enables intelligent coding and step-through debugging. > Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Apps built with the Adobe(R) Flex(R) framework and Flex Builder(TM) are powering Web 2.0 with engaging, cross-platform capabilities. Quickly and easily build your RIAs with Flex Builder, the Eclipse(TM)based development software that enables intelligent coding and step-through debugging. Download the free 60 day trial. http://p.sf.net/sfu/www-adobe-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
