Shabbir Hussain wrote: > I need to retrofit an old CNC Lathe machine with SIEMENS Servo Motors. The > servo drives accept +/- 10V as velocity command. My question is which of the > following combination is suitable to be used for interfacing these servos and > differential encoders. > > 1. MESA 7I43-P with 7I33 > 2. MESA 5I20 with 7I33 > 3. MOTENC-Lite PCI (7544) > > Can I use MESA 7I33 with MESA 7I43-P?
Either the 7i43-P or the 5i20, together with the 7i33, would probably work well for you. I prefer the 5i20 over the 7i43-P because PCI is so much easier to deal with than the EPP parallel port, and it's an order of magnitude faster. I dont know wnything about the MOTENC-Lite. -- Sebastian Kuzminsky All my desires and ruminations are no more and no less than eddy currents generated by the gradual exhalation of our universe. And until this great exhalation is finished, my thoughts live on. <http://tinyurl.com/c2t5rb> ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
