On Friday 08 May 2009, Matt Shaver wrote: >On Fri, 2009-05-08 at 01:17 -0700, Michael Hendricks wrote: >> I have to ask the gurus before I go insane...Is there a good open source >> CAM SW package out there? > >The avant-garde favor: > >http://code.google.com/p/heekscnc/ > >To gain the maximum benefit you'll need to build this from the latest >sources. > >Thanks, >Matt > Now that looks pretty darned good, bookmarked for future references. Thanks Matt. > > >---------------------------------------------------------------------------- >-- The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK > i700 Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com >_______________________________________________ >Emc-users mailing list >Emc-users@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-users
-- Cheers, Gene "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) When bad men combine, the good must associate; else they will fall one by one, an unpitied sacrifice in a contemptible struggle. - Edmund Burke ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
