On Sun, 2009-05-10 at 21:47 +0200, Lars Andersson wrote: > I suppose some client application can connect via "emcrsh" to run a remote > mill controller. What client can do that? > > (Really I am asking how to remote control a mill/EMC2/RTAI system.)
This might help: http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Running_Multiple_User_Interfaces (Short URL) http://alturl.com/iq58 You don't need emcrsh to run VNC. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
