I use Rhino and RhinoCam with great success. It works. I have not had a single crash yet. And the GCode never caused concern. Rainer
On Wed, May 13, 2009 at 4:42 PM, Rich Amaral <rama...@aes-softwareconsulting.com> wrote: > Hey guys, > > Can anyone suggest a "good" CAD package either open source (preferred) > or commercial (reasonable price) that you've used and works well. I'm > looking for something with an easy/intuitive interface, that can > export either dxf or gcode for either 2.5d or 3d. It would be nice if > it rendered the part in 3d but not mandatory. My intention is to use > this package to create parts to later export as dxf and import into > gcam to view and generate gcode. > > Thanks! > > -Rich > > > ------------------------------------------------------------------------------ > The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your > production scanning environment may not be a perfect world - but thanks to > Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 > Series Scanner you'll get full speed at 300 dpi even with all image > processing features enabled. http://p.sf.net/sfu/kodak-com > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- _________________________________ Rainer M. Schmidt Complex Consulting LLC b...@complexllc.com VoIP (646)-233-1002 FAX (646)-435-9216 ------------------------------------------------------------------------------ The NEW KODAK i700 Series Scanners deliver under ANY circumstances! Your production scanning environment may not be a perfect world - but thanks to Kodak, there's a perfect scanner to get the job done! With the NEW KODAK i700 Series Scanner you'll get full speed at 300 dpi even with all image processing features enabled. http://p.sf.net/sfu/kodak-com _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
