Hi, We've been running a Peddinghaus machine on EMC 2.1.5 for a couple of years. The hard drive has now totally died (not recognised by BIOS) and I need to restore the system from backup files - so...
I've installed 2.3, but am going back to 2.2.2 with Ubuntu 6.06 so the kernel version and all files match the original install as closely as possible. Maybe upgrade later once it's up and running again I should be able to recompile the *.comp files from an old (matching the original install) SVN set of files It seems easy enough to work out where the ini files and nc_file configs go, by viewing the (custom) startup scripts The main issue I have is with the custom I/O board - there's a file "hostmot-pedioA.bin" which is noted as "the right file", but I can't see where to put it or if it needs anything doing with it. Most of the documentation I've searched is for setting up the parallel port, 5i20's or similar, rather than a custom board. There's no clues I can find in the scripts (it's not referred to in plain text anywhere).. The guy who originally set this up did post to this list a few times, but I've not found any relevant posts... Any ideas? Graham ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
