Gentlemen,
latest git pull -
I set the coordinates of the G54... offsets using the touch off button.
The values are remembered until I shut the control off.
There are values in each offset prior to touching off to set zero. When I
restart the control the values are reset to the prior values. The set
positions are not remembered.
example
home the machine
mdi g55
the position displays X10.0000 Y10.0000 Z10.0000
mdi g54
move the machine to X-20.0000 Y-20.0000 Z-20.0000
touch off g55 xy and z
mdi g55
display shows X0 Y0 Z0
mdi g91g28x0y0z0
display shows X20.0000 Y20.0000 Z20.0000
mdi g54
display shows X0 Y0 Z0
restart control
home the machine
mdi g55
display show X10.0000 Y10.0000 Z10.0000
I think the control should show X20.0000 Y20.0000 Z20.0000.
I think this is different behavior than I have seen before. I think the
control used to remember the touch off values. I have not been smoking
anything, honest.
thanks
Stuart
--
Few will listen,
Of the few who listen, fewer still will understand,
Understanding does not mean believe,
Of the handful who believe, most may not know what to do,
Those who even know, how many will actually do ?
And the rare ones who have done it.......
Need not listen anymore.
you can lead a person to knowledge
but you cannot make him think
------------------------------------------------------------------------------
Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day
trial. Simplify your report design, integration and deployment - and focus on
what you do best, core application coding. Discover what's new with
Crystal Reports now. http://p.sf.net/sfu/bobj-july
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
