That doesn't sound anything like what I saw. It is always a good practice to place needed parameters at the beginning of each file because you never know how the last file might have left the system configured.
Can you pastebin the file and post a link? I forgot are you running the latest version of 2.3? John On 11 Nov 2009 at 7:23, Frank Tkalcevic wrote: > If I only have G61.1 in the ini file, the sim shows a significantly > curved > path. Putting G61.1 in the gcode file will trace the path as > expected. > > I only tried it in a sim version. I wasn't game to run it on the > real > machine while it was drawing curved paths. The particular path I > noticed it > on was retracting the parting tool from a deep groove. Watching it > go > sideways through the part was a bit upsetting. > > Frank > > > -----Original Message----- > > From: John Thornton [mailto:bjt...@gmail.com] > > Sent: Tuesday, 10 November 2009 11:13 PM > > To: Enhanced Machine Controller EEMC" > > Subject: Re: [Emc-users] G61/G61.1 not working when put in > > ini file startupfield > > > > The traced route might not be exactly the cut route because > > of delays in updating the screen. The display is not updated > > in real time AFAIK. I have noticed that when doing very small > > work with G61 or G61.1 which are the same. > > > > John > > > > On 10 Nov 2009 at 9:10, Frank Tkalcevic wrote: > > > > > In my lathe configuration, I have... > > > > > > RS274NGC_STARTUP_CODE = G18 G7 G61.1 > > > > > > in the [RS274NGC] section of the ini file. > > > > > > Even though on the MDI panel G61.1 is shown to be an active > G-Code, > > > the route traced is cutting corners. I need to explicitly > > put G61.1 > > > in my Gcode program for it to work. > > > > > > Is this a bug, or my misunderstanding of how this works? > > > > > > Thanks, > > > Frank > > > > > > > > > > -------------------------------------------------------------------- > > > ---------- > > > Let Crystal Reports handle the reporting - Free Crystal > > Reports 2008 > > > 30-Day trial. Simplify your report design, integration and > > deployment > > > - and focus on what you do best, core application coding. > Discover > > > what's new with Crystal Reports now. > http://p.sf.net/sfu/bobj-july > > > _______________________________________________ > > > Emc-users mailing list > > > Emc-users@lists.sourceforge.net > > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > > > > -------------------------------------------------------------- > > ---------------- > > Let Crystal Reports handle the reporting - Free Crystal > > Reports 2008 30-Day trial. Simplify your report design, > > integration and deployment - and focus on what you do best, > > core application coding. Discover what's new with Crystal > > Reports now. http://p.sf.net/sfu/bobj-july > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > > > -------------------------------------------------------------------- > ---------- > Let Crystal Reports handle the reporting - Free Crystal Reports 2008 > 30-Day > trial. Simplify your report design, integration and deployment - and > focus on > what you do best, core application coding. Discover what's new > with > Crystal Reports now. http://p.sf.net/sfu/bobj-july > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Let Crystal Reports handle the reporting - Free Crystal Reports 2008 30-Day trial. Simplify your report design, integration and deployment - and focus on what you do best, core application coding. Discover what's new with Crystal Reports now. http://p.sf.net/sfu/bobj-july _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
