On Thu, 2009-12-03 at 11:39 +0800, Bh FeRmi wrote: ... snip > required all the excess copper to be remove. I am looking for a simple > way to perform the task of removing the excess large copper area, not > just cutting round the traces. > Been to many sites, some are suggesting adding rubout layer, I am just > hoping if there is an ulp option available. > I am also looking at other option, such as the image-2-gcode. > > Thanks! > bhF
If you don't have allot of boards to do, I have removed copper by getting a sharp knife under an edge far enough to get my thumbnail on the copper and knife, then peel it off. Like removing the release paper off a label. Now that I am thinking about it, I thought Eagle had a setting for clearing unused copper. I just can't remember where, sorry. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
