Martin, As a fellow Goldwing owner I had to reply to your question.
1. I dont' know what kind of oil is in my Goldwing (I haven't had to change it yet). 2. Beer is more important than oil so long as you have oil. 3. I personally like the CNC4PC C1G breakout board and used to use one on my plasma when I used the parallel port. Now I'm using a Mesa 5i20 with my Gecko 203v stepper drives and an Antek power supply which is an awsome combo for me. http://stores.ebay.com/Antek-inc http://www.mesanet.com/ http://www.cnc4pc.com/Store/osc/index.php http://www.geckodrive.com/ Because your a fellow Goldwing rider I'll give you the secret url to my web site in case you like beer making, wine making, or cooking. http://suburb.semo.net/jet1024/index.html And I think you will find the folks around here pretty helpful and friendly. John On 1 Dec 2009 at 11:34, Martin Pinkston wrote: > Good morning listers, > I am cautiously submitting my first official question, but I suspect > this > may have the same response that asking an e-list of Honda Goldwing > motorcycle riders what the best motor oil is. You can't even imagine > unless > you've seen it....bikers can get ugly over motor oil....sheesh, > you'd think > it was something as important as beer. So anyways, here goes. > > I was doing some searching on the net for breakout boards and I came > across > the Embeddedtronics.com web site. I was looking at the Stepper > Breakout, > bare bones board. I have no problem soldering my own components onto > a > board. Is there any issues with this route I should be aware of ? > > Thanks guys. > Martin (ducking behind the tower) > -------------------------------------------------------------------- > ---------- > Join us December 9, 2009 for the Red Hat Virtual Experience, > a free event focused on virtualization and cloud computing. > Attend in-depth sessions from your desk. Your couch. Anywhere. > http://p.sf.net/sfu/redhat-sfdev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
