Le vendredi 4 décembre 2009 16:48:45, Chris Epicier a écrit : > Hi all > > I am looking forward to obtain my logitech rumblepad II wireless. Meanwhile > I want to use my logetch joypad 2. So I looked at this > > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Using_A_Joypad_To_Move_Your_CNC > _Machine > > and at the file joypad_V3.hal that I found on my emc 2.3.4.1 install. As > noted in joypad_V3.hal, I edited my cnc.ini as follows: > > " > ... > [HAL] > HALUI = halui > HALFILE = CNC.hal > #HALFILE = custom.hal > HALFILE = joypad_V3.hal > #HALFILE = /home/ck/emc2/configs/CNC/joypad_V3.hal > POSTGUI_HALFILE = custom_postgui.hal > #HALFILE = joypad_V3.hal > ... > " > > when i start emc2 I get Could not open command file 'joypad_V3.hal' > > the file is in my emc2/configs/cnc directory, as is cnc.ini, read > permissions are set chmod ugo+r joypad_V3.hal > > So why does it not find 'joypad_V3.hal'? > > greets chris >
Try to uncomment (remove the #) ont the line with the full joypad_V3.hal path, and comment the line with only the filename. ------------------------------------------------------------------------------ Join us December 9, 2009 for the Red Hat Virtual Experience, a free event focused on virtualization and cloud computing. Attend in-depth sessions from your desk. Your couch. Anywhere. http://p.sf.net/sfu/redhat-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
