Hello group! I have set up a retrofit 3 axis milling machine with mesa 5i20+7i33+2x7i37 The 3 axes are configured, tuned and works great. Now I want to use the fourth channel on the 7i33 to drive my freq inv. spindle I need a spindle enable signal and a 0-10v signal. In the wiki I found "Analog spindle speed control" using Mesa 5i20, but this is old stuff not using HM2 driver, and it looks like this:
# Set up spindle speed net SpindleOn motion.spindle-on net spindle-rpm-cmd motion.spindle-speed-out setp m5i20.0.dac-03-gain [SPINDLE]DAC_SCALE linksp SpindleOn => m5i20.0.dac-03-enable linksp spindle-rpm-cmd => m5i20.0.dac-03-value setp m5i20.0.dac-03-offset 80 Can somebody help me to put together the right hal code to work with HM2? I have searched the wiki and forums, but cant find it anywhere. Best Regards! Lars Levin ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
