http://linuxcnc.org/docs/html/gcode_main.html#sec:G96,-G97:-Spindle
Says that spindle speed is calculated on the basis of machine X position and Tool Offset. This appears to mean machine absolute position? With my machine X(abs) runs from 0 to -130 but the G54 offsets are set to make that work properly for machining. CSS appears to work, with the speed hitting the max as the tool tip reaches the middle of the work, so have I just got lucky, or is the documentation not entirely true? As a secondary question, is G96 affected by G7 (Diameter) mode? I am wondering if I am running at half (or twice) the requested speed. I guess it is an easy enough question to answer with a calculator. -- atp ------------------------------------------------------------------------------ Download Intel® Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
