Hi When RELEASED: emc 2.4.0 will be on 1 CD? without "upgrade to 2.4") thanks aram > On Mon, May 10, 2010 at 7:18 PM, Jon Elson <el...@pico-systems.com> wrote: > >> Neil Baylis wrote: >> > I rebooted again (this is the third time since I did the upgrade to >> 2.4) >> and >> > checked lsmod. Still the same: no parport_pc, but parport is loaded >> with >> > dependencies lp and ppdev. I tried emc again, and now it works. While >> emc >> is >> > running, lsmod indicates the following: >> > >> I might power down and reboot just to make sure it comes up right EVERY >> time. This sounds suspicious. >> (and, just in case you didn't know, there is a big difference between >> logging off and rebooting the kernel.) > > > OK, I'll power cycle and check a few more times. > > Neil > ------------------------------------------------------------------------------ > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users >
------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
