I would suggest that you try ClassicLadder. It is a little overkill for just the lube pump but once you get the hang of it, you will probably find lots of other uses for it. For instance on my lathe it takes a second or two after they are enabled for the drives to signal back that they are ok. I use a timer triggered off the drives enable that ignores the drives ok signal for the first couple of seconds.
Probably the best signal to enable the pump is one of the drive enables. It doesn't matter which one because as far as I know they all come on together anyway. If you want to be extra safe, make the drive enable signal also reset the timer so that you always get a shot of oil when you enable the drives. This way, if the machine has been sat in estop for a while you get an immediate shot of oil before you start moving. Les ------------------------------------------------------------------------------ This SF.net email is sponsored by Sprint What will you do first with EVO, the first 4G phone? Visit sprint.com/first -- http://p.sf.net/sfu/sprint-com-first _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
