Great. Would anyone suggest how to do it with HALUI? Just trying to get started with Halui.
Here are the requirements again: Here are my requirements: 1) If flood is set to ON on the maintained switch, then maintain flood coolant whenever spindle runs. 2) If flood is set to OFF, then just do as G code says or according to a GUI input. thanks On Fri, Jul 30, 2010 at 9:42 AM, Stuart Stevenson <[email protected]> wrote: > Sounds logical to me. One of my machines with a Fanuc control handles the > coolant as follows. > 3 position switch > up position - auto - m08/m09 controls the coolant > middle position - off - coolant is off all the time > down position - on - coolant is on all the time > > On Fri, Jul 30, 2010 at 9:30 AM, Igor Chudov <[email protected]> wrote: > >> On my Bridgeport Interact 2 mill, I have a maintained switch that >> turns on either flood or mist coolant (MIST-OFF-FLOOD). >> >> The flood coolant is run by a pump that sits in the sump in the mill's >> body. >> >> I have for now wired it so that I turn flood on and off from EMC (GUI >> or G-code). Control from GUI works great. >> >> The MIST-OFF-FLOOD switch is not operational. It does nothing. I have >> not wired it in any way. >> >> I would like to wire it with HALUI and I want to make sure that I do >> it in a way that is not stupid. >> >> Here are my requirements: >> >> 1) If flood is set to ON on the maintained switch, then maintain flood >> coolant whenever spindle runs. >> 2) If flood is set to OFF, then just do as G code says or according to >> a GUI input. >> >> Does this make sense at all? Is that a dumb way to control flood coolant? >> >> How would you suggest I do this with HALUI. I have not yet even >> started hooking up any halui things, but now is the time to really do >> it, as the rest of the mill is working. >> >> Thanks guys! >> >> i >> >> >> ------------------------------------------------------------------------------ >> The Palm PDK Hot Apps Program offers developers who use the >> Plug-In Development Kit to bring their C/C++ apps to Palm for a share >> of $1 Million in cash or HP Products. Visit us here for more details: >> http://p.sf.net/sfu/dev2dev-palm >> _______________________________________________ >> Emc-users mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/emc-users >> > > > > -- > dos centavos > ------------------------------------------------------------------------------ > The Palm PDK Hot Apps Program offers developers who use the > Plug-In Development Kit to bring their C/C++ apps to Palm for a share > of $1 Million in cash or HP Products. Visit us here for more details: > http://p.sf.net/sfu/dev2dev-palm > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ The Palm PDK Hot Apps Program offers developers who use the Plug-In Development Kit to bring their C/C++ apps to Palm for a share of $1 Million in cash or HP Products. Visit us here for more details: http://p.sf.net/sfu/dev2dev-palm _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
