Hi All;
The following G Code does a great Left Hand thread but
I have to lower the AXIS Spindle Override slider before
spindle-at-speed will come on and start threading.
The Spindle gear selected is 230 RPM max, but the
spindle-rpm-cmd goes past that and is continually
trying to run the spindle faster and faster.
Isn't there some way to set a max speed in the G Code,
or somewhere, to limit the spindle RPM command?
Everything I tried so far doesn't.
G92 X.525 Z0
M03
G0 X.6
Z-2
X.510
G33 Z.2 K.0626
G0 X.6
Z-2
X.5
G33 Z.2 K.0626
G0 X.6
Z-2
X.495
G33 Z.2 K.0626
G0 X.6
Z-2
X.495
G33 Z.2 K.0626
G0 X5.
Z5.
G92.1
M09
M30
Thanks
Don
------------------------------------------------------------------------------
This SF.net email is sponsored by
Make an app they can't live without
Enter the BlackBerry Developer Challenge
http://p.sf.net/sfu/RIM-dev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
