my motors are brushed dc servo motor 10M and 20M, yellow caps. dont know the drives off hand. machine was built in i believe 86. the price on the motors was free and i got paid $10 an hour stripping the machine, so i cant complain a bit. I've toyed with the idea of buying the mesa dc servo drives and just using them with the 5i20 ive had over a year and havnt done anything with
Jim On Thu, Aug 19, 2010 at 1:27 PM, Jon Elson <el...@pico-systems.com> wrote: > Stuart Stevenson wrote: > >> > >> We just pulled a Fanuc 10/11 off the Enshu. We are using the Fanuc > drives > >> > > and motors for XYZ and spindle. We will be installling PPMC and I/O > hardware > > today. I should have the final schematics today. The machine was built in > > 1985. It should be a good test. > > > Wish I was there! November or thereabouts might work out well for me, I > don't want to take too > much vacation time all at once. > > > Jon > > > ------------------------------------------------------------------------------ > This SF.net email is sponsored by > > Make an app they can't live without > Enter the BlackBerry Developer Challenge > http://p.sf.net/sfu/RIM-dev2dev > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF.net email is sponsored by Make an app they can't live without Enter the BlackBerry Developer Challenge http://p.sf.net/sfu/RIM-dev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
