On Wed, 8 Sep 2010, Igor Chudov wrote:
Date: Wed, 8 Sep 2010 13:44:35 -0500
From: Igor Chudov <ichu...@gmail.com>
Reply-To: "Enhanced Machine Controller (EMC)"
<emc-users@lists.sourceforge.net>
To: "Enhanced Machine Controller (EMC)" <emc-users@lists.sourceforge.net>
Subject: Re: [Emc-users] EMC as an alternative to Heidenhain iTNC 530,
Siemens 840D, etc.
On Wed, Sep 8, 2010 at 1:37 PM, Ulf Dambacher
<i...@dambacher-retrofit.de> wrote:
Hi Flo
If you have money for a dmg machine of this new age, maybe emc is not
what you need.
The Siemens 810 is fully digital and fitting emc with the other digital
controls would require much rewiring.
It would be better and simpler to upgrade the 810 to 840.
I kind of agree, but wonder, what does it mean "fully digital"?
It means their analog stuff is all buried in the drives, so the motor drive
interface is digital.
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
------------------------------------------------------------------------------
This SF.net Dev2Dev email is sponsored by:
Show off your parallel programming skills.
Enter the Intel(R) Threading Challenge 2010.
http://p.sf.net/sfu/intel-thread-sfd
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users
