Hi Jeff: Thanks for looking at this issue. So I'm confused are you saying that buy leaving X un-allocated 7+ moves before the move that broke down, I caused this error? I'm at work right now, but if I understand your reply correctly, I can add this additional information and revert my split G3 command back to the large motion and turn this problem off?
Needless to say, I'm pretty darn new to g-code no expert here. Thanks for helping me become less of a noob-boob. But you know we all go through this. Thanks! Andrew > > ------------------------------ > > Message: 4 > Date: Mon, 13 Sep 2010 07:05:37 -0500 > From: Jeff Epler <[email protected]> > Subject: Re: [Emc-users] Error's building up in long G03's > To: "Enhanced Machine Controller (EMC)" > <[email protected]> > Message-ID: <[email protected]> > Content-Type: text/plain; charset=us-ascii > > The problem may be much simpler than that. > > It looks like you don't command an X position before your > first arc > move. If I command X0.000, then your part program > loads just fine in > the axis preview on my emc 2.4.3 system. > > > F5.0 > > G17 > > G00 Z1.000 > < G00 Y2.200 X0.000 > > G00 Z0.000 > > Jeff > ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
