Tried stepconf again this morning, a couple of bugs and suggestions Bugs
Test base period from within Stepconf locks PC up completely, needs hard reset! Save shortcut on desktop produces a xxxx.desktop launcher file on desktop that fails to run with "Untrusted application" - It also has the wrong icon. Suggestions In mm setup - the default axis limits are tiny X is 0 to 8 Z is -4 to 0 Too small to test axis Probably better without any and force the user to enter figures or at least some realistic figures. Selecting pyvcp panel produces the old jittery version, rather than the format shown in the manual. setp scale.0.gain .60 net spindle-velocity => abs.0.in net absolute-spindle-vel <= abs.0.out => scale.0.in net scaled-spindle-vel <= scale.0.out => pyvcp.spindle-speed Better if it produced a panel and hal files similar the sim setup with net spindle-rpm-filtered => pyvcp.spindle-speed net spindle-at-speed => pyvcp.spindle-at-speed Steve Blackmore -- ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
