On Wed, Sep 29, 2010 at 12:30 PM, Jon Elson <el...@pico-systems.com> wrote:
> If there are gears between the spindle and motor, then you have a > backlash problem when the spindle reverses. > Check out http://pico-systems.com/bridge_spindle.html to see how I put > an encoder on a > spindle that was almost impossible to find any other way to do it. This > has worked reliably > for six months, so far. These sensors are intended for use inside auto > transmissions, so they > should stand up to oil bath gearboxes in machines, too. > the encoders signals come directly from the motor shaft the index comes directly from the spindle this should be a nice setup -- dos centavos ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
