Hi Everyone, Here is some info: Following on from a thread a few weeks ago re. ITX boards, I've just bought one of the above motherboards. It is very small and quiet (no fan), I've connected it to my Kingston SSD 30Gb solid state drive and all looks good. Its going to make a very small PC system to run the mill. I had to download the 10.04 Lucid Lynx disto as Hardy Heron did not want to load. I used UNETBOOTIN to create a bootable USB stick - this worked really well and created a bootable USB drive with no issues. I've run the latency test via the live install and get max jitters on the base thread of around 4000 to 6000 ns which looks very good to me. I will install to disk tomorrow night if I have time.
Here are the questions: If anyone else is using this board are there any config tips? (I've set the LPT to EPP mode in BIOS) Can anyone advise me on how to create a "bare bones" 10.04 setup please? (the mill PC is only used to mill + grab OS / EMC updates) When running from the "Live CD" I can set the base period to 17000ns anything less generates RTAPI delays - is this in keeping with the jitter values? Many thanks. Andy ------------------------------------------------------------------------------ Start uncovering the many advantages of virtual appliances and start using them to simplify application deployment and accelerate your shift to cloud computing. http://p.sf.net/sfu/novell-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
