Hi Kent, Jon and All;
Thanks for your apology but the Motherboard has apparently worked well for
many; and for me also now.
Let me share a few of my similar experiences.
For the last 40 years my experience has been:
If there is a program with a Bug, it is in the part I need.
If there is a electronic device with a flaw, it is in the part I need.
The most revealing example of this was when I bought two Top of The Line
Graphic Work Stations from Silicon Graphics in the mid 1980s. One of them
would not auto boot on Power Up. Silicon Graphics replaced everything in the
chassis including the wiring, with no change. Their solution was to peal the
ID plate off and put it on a new unit.
>From these experiences one may think, jinks.
However I am convinced the real problem is spirit warfare.
So, I thank you for your concern, help and prayer.
Don
[email protected]
On Tue, Oct 19, 2010 at 9:19 PM, Jon Elson <[email protected]> wrote:
> Kent A. Reed wrote:
> > Apparently, Jon's
> > initialization program isn't well behaved, so it just works:-) Good to
> know.
> >
> I just make stuff work - well behaved isn't in my vocabulary!
>
> Jon
>
>
> ------------------------------------------------------------------------------
> Download new Adobe(R) Flash(R) Builder(TM) 4
> The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
> Flex(R) Builder(TM)) enable the development of rich applications that run
> across multiple browsers and platforms. Download your free trials today!
> http://p.sf.net/sfu/adobe-dev2dev
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>
------------------------------------------------------------------------------
Download new Adobe(R) Flash(R) Builder(TM) 4
The new Adobe(R) Flex(R) 4 and Flash(R) Builder(TM) 4 (formerly
Flex(R) Builder(TM)) enable the development of rich applications that run
across multiple browsers and platforms. Download your free trials today!
http://p.sf.net/sfu/adobe-dev2dev
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
