Hello I am new at this so...also part of New Years resolution to get this
running, I want to view the installation of lathe (previously a emco 5) to the
computer. The emco boards and motors were questionable so new motors and
driver Board were installed (not Emco). The only thing that is emco still is
the spindle which I figured that I could just run that by turning it on and it
has a rheostat for variable speed. I tried to run this a few years ago but no
time and the computer was pretty slow and I would get a lot of errors/ faults,
lagging pretty bad. I have a newer computer now and emc2 installed but I can
not remember if I used a printer port as the 25 pin connection to drive the x z
axis motors or if I had to install a video card 9 pin to run x z axis. I
installed a 9 pin video card in the older computer but like I said, I cant
remember if it was used to send the signal to the x,z axis motors. Any help
would be great. Thanks in
advance Ron
------------------------------------------------------------------------------
Learn how Oracle Real Application Clusters (RAC) One Node allows customers
to consolidate database storage, standardize their database environment, and,
should the need arise, upgrade to a full multi-node Oracle RAC database
without downtime or disruption
http://p.sf.net/sfu/oracle-sfdevnl
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users
