There is a HAL pin, called motion.requested-vel, take a look, if You can use it. http://linuxcnc.org/docs/html/config_emc2hal.html
Viesturs 2011/1/8 Farzin Kamangar <[email protected]>: > Dear EMC users, > I was going to show the commanded feed from the Gcode program in the AXIS > Gui. This way we could see feed from Gcode instructions like F1000 somewhere > in terms of unit length > per minute. Would you please let me know how I can read this from something > like emc.stat.??? updated all the time. Thanks > Farzin > ------------------------------------------------------------------------------ > Gaining the trust of online customers is vital for the success of any company > that requires sensitive data to be transmitted over the Web. Learn how to > best implement a security strategy that keeps consumers' information secure > and instills the confidence they need to proceed with transactions. > http://p.sf.net/sfu/oracle-sfdevnl > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Gaining the trust of online customers is vital for the success of any company that requires sensitive data to be transmitted over the Web. Learn how to best implement a security strategy that keeps consumers' information secure and instills the confidence they need to proceed with transactions. http://p.sf.net/sfu/oracle-sfdevnl _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
