On 26 March 2011 10:27, Anders Wallin <[email protected]> wrote:
> If you can make an alternative one with a 'hi-fi' look (smooth wheel, > no detents(?)), with maybe a push-down functionality (the whole wheel > is a momentary-on push-button) then it might be interesting for a lot > more DIYers than just us CNCers. I have that on the controller I am building. I got the switch from eBay for a couple of pounds. Unfortuntately (as mentioned earlier) it seems to stop tracking at really quite moderate speeds. I will see how it goes in use. (I might try pulling one apart to see why it stops tracking, too) -- atp "Torque wrenches are for the obedience of fools and the guidance of wise men" ------------------------------------------------------------------------------ Enable your software for Intel(R) Active Management Technology to meet the growing manageability and security demands of your customers. Businesses are taking advantage of Intel(R) vPro (TM) technology - will your software be a part of the solution? Download the Intel(R) Manageability Checker today! http://p.sf.net/sfu/intel-dev2devmar _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
