There is an example in the Integrators Manual. John
Colin K wrote: > Hi all, > > I recently set up my mini lathe with the EMC stepconf and the basic functions > are great. However I do not have any tach display in Axis and if I try to run > a g76 cycle everything in Axis looks right but when I hit go, it just stares > back at me and does nothing. > > Right now I have my spindle index wired in and if I use the hal config > screens in axis I can see the state of the pin flip as I turn the spindle. > However I get the sense I may need to do a bit more config to get it all to > work. > > Currently the spindle control is manual, FYI. > > Any pointers as to what a proper hal/ini file would look like would be > greatly appreciated! > > Sent from my iPhone > ------------------------------------------------------------------------------ > Benefiting from Server Virtualization: Beyond Initial Workload > Consolidation -- Increasing the use of server virtualization is a top > priority.Virtualization can reduce costs, simplify management, and improve > application availability and disaster protection. Learn more about boosting > the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ Benefiting from Server Virtualization: Beyond Initial Workload Consolidation -- Increasing the use of server virtualization is a top priority.Virtualization can reduce costs, simplify management, and improve application availability and disaster protection. Learn more about boosting the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
