2011/5/7 Tom Easterday <[email protected]>: > Is there any way in Axis to have manual control of position while a tool > change dialog is open? I have been running a program that doesn't raise the > head enough to make the tool change, and it would be nice not to have to go > through the gyrations of hitting Ok on the tool change dialog, and trying to > quickly stop execution, moving the head up, changing tool, and then trying to > remember which line I stopped at and selecting it, right clicking and doing > "run from here". > > What would be ideal would be to bring the main Axis window forward, manually > move up, change the tool, bring the tool change dialog forward and then > clicking OK on the tool change. But, this doesn't work.
This question has been covered previously. Take a look at this email I found in archive: http://www.mail-archive.com/[email protected]/msg08727.html I think that might be useful. Anyway, I suggest digging through archives, because "jogging while paused for toolchange" has been discussed. Viesturs ------------------------------------------------------------------------------ WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
