Hi, I decided to join this thread instead creating new. I have 2.2 kW chinese spindle with Huanyang VFD and want to control it with Modbus. There's a thread on cnczone http://www.cnczone.com/forums/diy-cnc_router_table_machines/91847-huanyang_vfd_rs485_modbus.html with a component and config files for the VFD (message 26). When I start EMC2 using them, hy_vfd gives an error:
EMC2 - 2.6.0~pre Machine configuration directory is '/home/pkm/emc2/configs/machine' Machine configuration file is 'machine.ini' Starting EMC2... spindle-vfd: device='/dev/ttyS0', baud=19200, bits=8, parity='none', stopbits=1, address=1, verbose=1, PID=1433 Opening /dev/ttyS0 at 19200 bauds (none) RTAPI: ERROR: version mismatch 1 vs 0 HAL: ERROR: rtapi init failed spindle-vfd: ERROR: hal_init failed custom.hal:5: hy_vfd exited without becoming ready Shutting down and cleaning up EMC2... Cleanup done Is it because of newer EMC2 version? How can I correct it? Andrew ------------------------------------------------------------------------------ AppSumo Presents a FREE Video for the SourceForge Community by Eric Ries, the creator of the Lean Startup Methodology on "Lean Startup Secrets Revealed." This video shows you how to validate your ideas, optimize your ideas and identify your business strategy. http://p.sf.net/sfu/appsumosfdev2dev _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
