Hi everybody; I made another try at running emc over ssh -Y again this morning, but it fails shortly after opening an incomplete axis screen, as follows:
Starting EMC2... X Error of failed request: BadLength (poly request too large or internal Xlib length error) Major opcode of failed request: 136 (GLX) Minor opcode of failed request: 1 (X_GLXRender) Serial number of failed request: 2579 Current serial number in output stream: 2580 Shutting down and cleaning up EMC2... And of course the above is far more informative than the two log files it suggests I read. That machine is of course using the vesa driver, this one the most recent nvidia blob. >From glxinfo on that machine: direct rendering: No (LIBGL_ALWAYS_INDIRECT set) Is this miss-match the root cause of the problem? And, short of switching to a non-axis interface with no backplot abilities, is there a workaround? Thanks folks. Cheers, gene -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) * joeyh_ wonders if linux is supposed to lock up when you ask 100 processes to cat the entire cd drive ------------------------------------------------------------------------------ Magic Quadrant for Content-Aware Data Loss Prevention Research study explores the data loss prevention market. Includes in-depth analysis on the changes within the DLP market, and the criteria used to evaluate the strengths and weaknesses of these DLP solutions. http://www.accelacomm.com/jaw/sfnl/114/51385063/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
