Thanks Kirk, I'll spend a little more time with it and let you know how it goes,
DougM On Thu, Aug 4, 2011 at 10:18 PM, Kirk Wallace <[email protected]> wrote: > On Thu, 2011-08-04 at 21:59 -0700, Kirk Wallace wrote: > ... snip >> Also, the linux parallel port and printer drivers, if loaded, will >> reserve the I/O address blocks for printing and (may) keep EMC2 from >> using them. "lsmod" should list the loaded modules. Look for ppdev, pp, >> and parport_pc and unload them if needed (again, see above link). > > Another thing, this page: > http://wiki.linuxcnc.org/cgi-bin/emcinfo.pl?Startech > > has a C program that allows one to check or set the port mode to EPP or > Standard SPP. Setting a NetMos or Moschip card to EPP with this will > allow ECM2 to (sort of) use the port with FPGA signal generators, but > the port's firmware or hardware signal timing is messed up and will most > likely crash the system. > > -- > Kirk Wallace > http://www.wallacecompany.com/machine_shop/ > http://www.wallacecompany.com/E45/index.html > California, USA > > > ------------------------------------------------------------------------------ > BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA > The must-attend event for mobile developers. Connect with experts. > Get tools for creating Super Apps. See the latest technologies. > Sessions, hands-on labs, demos & much more. Register early & save! > http://p.sf.net/sfu/rim-blackberry-1 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ BlackBerry® DevCon Americas, Oct. 18-20, San Francisco, CA The must-attend event for mobile developers. Connect with experts. Get tools for creating Super Apps. See the latest technologies. Sessions, hands-on labs, demos & much more. Register early & save! http://p.sf.net/sfu/rim-blackberry-1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
