By what ever means you never have power on until the computer is up and running and EMC is in control of the port. On my plasma I have a simple switch that stays off until EMC is ready to control it.
John On 9/14/2011 10:54 PM, Ben Jackson wrote: > I have pin 1 of my parallel port connected to a relay that isn't driving > anything yet. When I start EMC2 I hear it click on/off. If I control it > explicitly with M64/65 (or other logic) it works fine, but even if I > do "setp parport.0.pin-01-out 0" it clicks at startup. I'm sure that's > the pin because if I "setp ... 1" it only clicks once and stays on. > > This might be happening with other outputs as well -- I always noticed a > stepper clonk at startup which might be the drivers enabling briefly. > ------------------------------------------------------------------------------ Doing More with Less: The Next Generation Virtual Desktop What are the key obstacles that have prevented many mid-market businesses from deploying virtual desktops? How do next-generation virtual desktops provide companies an easier-to-deploy, easier-to-manage and more affordable virtual desktop model.http://www.accelacomm.com/jaw/sfnl/114/51426474/ _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
