Hello, gentlemen!

I am trying to load 3-phase pwmgens on 7i43 for 7i39, but I receive error.

With this one EMC loads correctly:
CONFIG="firmware=hm2/7i43-4/SVST4_4_7I39.BIT num_encoders=3
num_pwmgens=3 num_stepgens=2"

Note that this line requests single-phase pwm generators.

So according to this manual:
http://www.linuxcnc.org/docs/devel/html/man/man9/hostmot2.9.html#config%20modparam

The line should look like this:
CONFIG="firmware=hm2/7i43-4/SVST4_4_7I39.BIT num_encoders=3
num_3pwmgens=3 num_stepgens=2"

But with this I receive error, in which I find this line to be most important:
[ 4776.024432] hm2/hm2_7i43.0: invalid token in config string: "num_3pwmgens=3"

So how exactly should that config modparameter look like for 7i43 to
load 3 instances of 3-phase pwm generator?

Viesturs

P.S.
Pin and Bit files for the customized firmware are available here:
http://www.cutting.lv/fileadmin/user_upload/SVST4_4_7I39.BIT
http://www.cutting.lv/fileadmin/user_upload/SVST4_4_7I39.PIN

------------------------------------------------------------------------------
All the data continuously generated in your IT infrastructure contains a
definitive record of customers, application performance, security
threats, fraudulent activity and more. Splunk takes this data and makes
sense of it. Business sense. IT sense. Common sense.
http://p.sf.net/sfu/splunk-d2dcopy1
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to