On Thu, Sep 29, 2011 at 11:59 PM, Martin Patton <[email protected]> wrote:
> > > > Brian, > > > I will do as you suggest and cut a grid. What did you adjust in the ini > file? > Thanks, > Marty > > I cannot recall the exact items to adjust since it was over two years ago > since I made the correction. You will most likely not be able to use > stepconf to make the adjustment. You will need to hand edit the file (not a > big deal). I believe its the scale parameter. Others will correct me if I > got this wrong. The integrator's manual has details on making the accurate > calculation. > > You mentioned that you are using 20tpi rods. Are these just standard > threaded rods? If so, that could be the source of the error. Getting the > expected versus actual position and calculating the scale needed. By doing > the grid you will find out if the error is in both axes (most likely) or > not. By doing a number of points, you will find if the error is linear (tpi > is slightly off, say 19.95 tpi - likely) or variable (threaded/acme rods are > not uniform across length - unlikely). > > Brian > ------------------------------------------------------------------------------ All of the data generated in your IT infrastructure is seriously valuable. Why? It contains a definitive record of application performance, security threats, fraudulent activity, and more. Splunk takes this data and makes sense of it. IT sense. And common sense. http://p.sf.net/sfu/splunk-d2dcopy2 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
