Cristian, When I set up my machine I had the speeds and accelerations set too high and the motors would just oscillate because they were not able to overcome the inertia of the leadscrews. Do they behave the same way when not coupled to the machine? Just a guess. Need more info to really understand the issue.
Marc On Oct 4, 2011, at 12:07 PM, Cristian Ruiz <[email protected]> wrote: > hello people I have a problem with stepper motors do not rotate, oscillate > and not where the problem is or where you set > ------------------------------------------------------------------------------ > All the data continuously generated in your IT infrastructure contains a > definitive record of customers, application performance, security > threats, fraudulent activity and more. Splunk takes this data and makes > sense of it. Business sense. IT sense. Common sense. > http://p.sf.net/sfu/splunk-d2dcopy1 > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users ------------------------------------------------------------------------------ All the data continuously generated in your IT infrastructure contains a definitive record of customers, application performance, security threats, fraudulent activity and more. Splunk takes this data and makes sense of it. Business sense. IT sense. Common sense. http://p.sf.net/sfu/splunk-d2dcopy1 _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
