On Saturday, February 25, 2012 03:46:32 PM Kirk Wallace did opine:

> On Sat, 2012-02-25 at 14:35 -0500, gene heskett wrote:
> ... snip
> 
> > I did that, next time I log into the buffalo I'll check & see if that
> > fixes it, thanks.  I have sent dd-wrt and buffalo msgs about that.
> > That config line is about 2" longer than any other config line in the
> > gui and really should have been made into 2 shorter lines.
> 
> ... snip
> 
> I avoided dd-wrt early on due its proprietary nature. OpenWRT works
> great for me.

That concerned us when we got involved with it at the tv station quite a 
while back.  Jim did I think, fool around and get the X86 version to build 
once with gcc but it didn't work, but that isn't apparently what 
BrainSlayer uses to build it.

OTOH, he does give away that which he can under the GPL.  Some he cannot 
because the radio chip makers insist on a royalty.  Atheros was one such 
but very reasonably priced, still is I think because you have to pay to 
turn the radio on, and now broadcom have thrown code and specs over the 
fence, so that covers about half of whats actually shipped, a much improved 
situation.  Those chipset radios that are not open source friendly, you 
will note aren't supported by open-wrt either.  If they cannot reverse 
engineer it, no support, don't even ask.

Cheers, Gene
-- 
"There are four boxes to be used in defense of liberty:
 soap, ballot, jury, and ammo. Please use in that order."
-Ed Howdershelt (Author)
My web page: <http://coyoteden.dyndns-free.com:85/gene>
YOW!!!  I am having fun!!!

------------------------------------------------------------------------------
Virtualization & Cloud Management Using Capacity Planning
Cloud computing makes use of virtualization - but cloud computing 
also focuses on allowing computing to be delivered as a service.
http://www.accelacomm.com/jaw/sfnl/114/51521223/
_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to