Holmquist, If your luck holds I might have a manual in the archives (VERY dusty boxes) and if that is true then it was already old in 1990. Siemens was already going their own way then. The cooperation was even before that time.
I will have a look in the week. j. On Sun, Mar 18, 2012 at 9:57 PM, Roger Holmquist <[email protected]> wrote: > > I got a task from my coming boss and that is to configure an old > Storebro 160 Lathe running Sinumerik 6T. > There is an issue about resetting the coordinate system to the > workpiece and doing tool compensation setup. > He also told me the Siemens system should be the same as a FANUC 6 ? > > Anyway, manuals for the system would be nice to have as that should > be the reason for the problem, maybe someone have a link or can point > in some direction? > > BTW, what about such a machine as a LinuxCNC target, don't know much > about it's features right now... > > / Roger > > PS > Viestus, thanks for your reply, I Guess you found my link who might > explain my cryptic statement about non-CNC-territory ;-) > DS > > > > > > ------------------------------------------------------------------------------ > This SF email is sponsosred by: > Try Windows Azure free for 90 days Click Here > http://p.sf.net/sfu/sfd2d-msazure > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > ------------------------------------------------------------------------------ This SF email is sponsosred by: Try Windows Azure free for 90 days Click Here http://p.sf.net/sfu/sfd2d-msazure _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
