On Tue, 2012-04-17 at 01:41 +1000, Peter Homann wrote: > Hi Gene, > > I wasn't pushing you to buy my breakout board. I'd assume you would have > bought a C10 from CNC4PC. It's a plain signal buffered board. Not as good as > mine of course. :)
I'm thinking the C26: http://www.cnc4pc.com/Store/osc/product_info.php?cPath=33&products_id=203 would be a closer match. It appears that the G540 was supposed to be an all in one type of thing, so the buffer should only add what is needed. I'm thinking a DSub, minimal board with SMT buffers, setup for output only, fits in a backshell, with an external power input terminal. It should be cheap enough that if it gets damaged, one tosses it and buys another. Maybe make it a kit or board only. -- Kirk Wallace http://www.wallacecompany.com/machine_shop/ http://www.wallacecompany.com/E45/index.html California, USA ------------------------------------------------------------------------------ For Developers, A Lot Can Happen In A Second. Boundary is the first to Know...and Tell You. Monitor Your Applications in Ultra-Fine Resolution. Try it FREE! http://p.sf.net/sfu/Boundary-d2dvs2 _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
